
PROGRAMMING18. SPECIFYING THE LASER FUNCTION
B–63664EN/02
350
A dedicated parameter (PRM.15410) is provided so that another delay
time can be set in high–precision contour control mode (HPCC mode).
1) Of the functions controlling the output conditions, the following
cannot be used together with the beam output condition delay
function. (If they are used, the beam output condition delay function
is disabled.)
S Piercing and high–speed piercing functions
S Edge machining function. (The function is assumed to be used if a
machining number is specified.)
S Startup machining function. (The function is assumed to be used if
a machining number is specified.)
2) Beam output condition data using system variables in macros cannot
be changed.
3) Beam output condition data using window functions cannot be
changed.
4) Beam output condition data using G10 (programmable parameter
input) cannot be changed.
5) During automatic operation, beam output condition data cannot be
changed on the laser setup screen.
Limitations
D High–precision contour
control function
D Using this function
together with other
functions