
C–AXIS FAPT FUNCTION
B–61804E–2/05
2. MACHINING DEFINITION
(MENU 4)
152
WARNING
The cutting conditions are automatically set according to the
selected machining type. Check the set conditions. If the
conditions are incorrect, the tool may collide with the
workpiece and/or machine, or forced machining may occur,
possibly causing damage to the machine and/or tool itself,
or injury to the user.
(1)Center drilling
DEPTH OF CUT D = Depth of cut (mm or inch). . . . .
CLEARANCE C1 = Clearance (mm or inch). . . . . . .
RPM N = Tool rotation speed (rpm). . . . . . . . . . . . . . .
FEED RATE FT = Feed amount per tool rotation . . . . . . . . .
(mm/rev)
(2)Drilling
TYPE 1
CLEARANCE C1 = Clearance 1 (mm or inch). . . . . . .
C2 = Clearance 2 (mm or inch)
DWELL ON/OFF DW =Specifies whether to perform. . . .
dwell at the bottom of the hole.
(0:Does not performs dwell, 1:
Performs dwell)
RPM N = Tool rotation speed (rpm). . . . . . . . . . . . . .
FEED RATE FT = Feed amount per tool rotation. . . . . . . .
(mm/rev)
2.1.4
Cutting Conditions