
B–61804E–2/05
3. EXECUTION OF
SYMBOLIC FAPT
PROGRAMMING AND
OPERATION BY SYMBOLIC FAPT
69
i) The figure defined by “REPEAT GROOVE” is defined as an
element by the arrow and G element row.
ii) Correct for each element. This is the same for the deletion.
iii)The relation between the pitch and groove is as shown below.
When DN = ± When DN = ²
NOTE
For pattern figure input, the end point value of the previous
element should already be fixed.
(2)Neck corner input
It is possible to define 3 types of DIN Standard neck corners. If
“NECK CORNER” is pressed, the display changes on the next screen.
³ “NECK CORNER”
In response to the question “TYPE =”, enter the neck figure type
number (1–3) for the type to be set.
The meaning of soft keys
“ESCAPE” Returns to the menu screen.. . . . . . . . .
“BACK PAGE” Returns to the “ES =” question screen.. . . . . .