
B–63505EN/02
3. INPUT AND OUTPUT OF DATA
141
Parameters can be input and output using the ALL IO screen.
Inputting parameters
1 Press soft key [PARAM] on the ALL IO screen, described in Subsec.
3.3.1.
2 Select EDIT mode.
3 Press soft key [(OPRT)]. Soft keys change as shown below.
READ PUNCH
4 Press soft key [READ], then [EXEC].
The parameters are read, and the “INPUT” indicator blinks at the
lower–right corner of the screen. Upon the completion of input, the
“INPUT” indicator is cleared from the screen.
To cancel input, press soft key [CAN].
Outputting parameters
1 Press soft key [PARAM] on the ALL IO screen, described in Subsec.
3.3.1.
2 Select EDIT mode.
3 Press soft key [(OPRT)]. Soft keys change as shown below.
READ PUNCH
4 Press soft key [PUNCH], then [EXEC].
The parameters are output, and the “OUTPUT” indicator blinks at the
lower–right corner of the screen. Upon the completion of output, the
“OUTPUT” indicator is cleared from the screen.
To cancel output, press soft key [CAN].
3.3.3
Inputting and
Outputting Parameters
Procedure
EXECCAN
Procedure
EXECCAN