
APPENDIXC. BOOT SYSTEM
B–63505EN/02
340
This screen is used to write a user file from flash memory to a memory
card. This function supports the writing of user files only. System files
cannot be written from flash memory to a memory card.
SYSTEM DATA SAVE
[BOARD:MAIN]
FILE DIRECTORY
1 NC BASIC(10)
2 DG SERVO( 1)
3 PMC-RB ( 1)
4 PCD 0.5M( 4)
5 NC1 OPTN( 8)
6 PMC0BSC ( 2)
END
∗∗∗ MESSAGE ∗∗∗
SELECT FILE AND HIT SELECT KEY.
[ SELECT ][ YES ][ NO ][ UP ][ DOWN ]
: Screen title.
: Names of files in flash memory. The number of management units
constituting each file appears in parentheses to the right of the file
name.
: Option for returning to the previous menu
: Message
(1) Position the cursor to the name of the file to be saved, then press the
[SELECT] soft key.
(2) The system displays the following confirmation message:
∗∗∗ MESSAGE ∗∗∗
SAVE OK ? HIT YES OR NO.
(3) To save the file, press the [YES] key. To cancel, press the [NO] key.
∗∗∗
MESSAGE ∗∗∗
WRITING FLASH ROM FILE TO MEMORY CARD.
SAVE FILE NAME : PMC–RA.000
C.2.4
System Data Save
Screen
Description
Screen configuration
Operation