
APPENDIX
B–63505EN/02
C. BOOT SYSTEM
333
When the boot system is started, the MAIN MENU screen appears. The
contents of this screen are described below:
SYSTEM MONITOR MAIN MENU 60M4 - 01
1. SYSTEM DATA LOADING
2. SYSTEM DATA CHECK
3. SYSTEM DATA DELETE
4. SYSTEM DATA SAVE
5. SRAM DATA BACKUP
6. MEMORY CARD FILE DELETE
7. MEMORY CARD FORMAT
10
. END
∗∗∗
MESSAGE ∗∗∗
SELECT MENU AND HIT SELECT KEY
[ SELECT ][ YES ][ NO ][ UP ][ DOWN ]
: Screen title. The series and edition of the boot system are indicated
at the right end.
: Function used to write data to flash memory
: Function used to check the edition of a file in ROM
: Function used to delete a file from flash memory
: Function used to make a backup of the data stored on a memory card
: Function used to make a backup of the data in SRAM
: Function used to delete a file from a memory card
: Function used to format a memory card
: Function used to terminate the boot system and start the CNC
: Brief guidance message or error message
Press the [UP] or [DOWN] soft key to select the desired function. After
positioning the cursor to the desired function, press the [SELECT] soft
key. Before executing a function, the system my request confirmation
from the operator by having him/her press the [YES] or [NO] soft key.
Position the
cursor.
[UP]
[DOWN]
→
Select a
function
[SELECT]
→
Check the
selection
[YES]
[NO]
→
Execute
the
function
→
Select END
→
Return to
original state
C.2
OPERATION AND
CORRESPONDING
SCREENS
D Operating procedure
D Basic operation