
B–61863E–1/06
10. READER/PUNCHER INTERFACEPMC LIBRARY
277
–12: Data cannot be output via the reader/puncher interface although five
seconds or more have elapsed.
For example, data cannot be output because the line is not
connected correctly.
–11: Data was output although the reader/puncher interface was not
open.
–1: The line of the reader/puncher interface is being used by the NC or
something other than PMC. The line cannot be opened by the PMC.
0: Processing the reader/puncher interface has terminated normally.
2: The specified data length is incorrect.
5: The specified data is incorrect.
6: The required reader/puncher interface option is not provided.
20: The reader/puncher interface is in an incorrect state. One possible
cause is that the DSR signal is not on because the line is connected
incorrectly.
File name and file number are incorrect.
21: The input buffer of the reader/puncher interface of the NC contains
no data. The request for input needs to be used after a waiting a short
while.
23: FANUC cassette does not contain the specified file.
file_name: Specify the file name with which data is read or the file
is created, using the ASCII code. Up to 17 characters can
be used for the file name.
Suffix NULL to the character string.
For file number specification, specify “file_name” = 0.
10.15
COMPLETION CODE
TYPES