
2. 15i SERIES HARDWARE
B–63785EN/01
132
Only one setting pin (TH1) is provided. It is located as shown in the figure
above.
TH1 : Set this pin to A. This pin is factory–set to A.
Name Specification
Data server board A2 A20B–8100–0511
ATA card interface board A20B–2100–0500
The board is mounted in the wide mini slot.
F–bus backplane
connector (female)
CNH4
LED PARITTY
B
A
CNH6A
CNH5
CD38
JNA
Setting pin TH1
Card eject switch
Connector number Application
CNH4A Used for connection with the ATA card interface board
CNH5 Used for data server board connection
CNH6A ATA card interface
CD38A Ethernet (TCP/IP) interface
For details on the LED mounting locations and LED tables, see Section
2.3.5.
Only one setting location (TH1) is provided. It is located as shown in the
figure above.
TH1 : Set this pin to A. This pin is factory–set to A.
D Setting adjustments
2.3.6
Data Server Board A2
D Specification
D Board mounting location
D Mounting locations of
connectors, LEDs, and etc.
D LED display
D Setting adjustments