
B–63785EN/01
7.TROUBLESHOOTING
407
A BUS ERROR occurred.
The first page of the system alarm is displayed as shown below:
FANUC SERIES 15I F000B
SYS_ALM 400 BUS ERROR
CPU CARD(MAIN)
ERROR OCCURRED AT 1998/10/16 14:24:03
PROGRAM COUNTER : xxxxxxxxH
ACT TASK : xxxxxxxxH
ACCESS ADDRESS : xxxxxxxxH ( (1) )
ACCESS DATA : xxxxxxxx xxxxxxxxH
ACCESS OPERATION : xxxxxxxx
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
| THE SYSTEM ALARM HAS OCCURRED, THE SYSTEM HAS STOPPED. |
+––––––––––––––––––––––––––––––––––––––––––––––––––––––––––+
PAGE UP OR DOWN(PAGE 1/ 5)
The slot in which the alarm occurred is displayed in (1).
The most likely cause is that the board in the slot is defective.
7.11.8
System Alarms 400 to
402 (BUS ERROR
INTERNAL WRITE BUS
ERROR A INTERNAL
WRITE BUS ERROR B)
D Description
D Screen displayed upon
the occurrence of the
error
D Cause and action