
APPENDIXB. ALARM LIST
B–63785EN/01
484
Number Message Contents
SP0001 SSPA: 01 MOTOR OVERHEAT An alarm (AL–01) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0002 SSPA: 02 EX DEVIATION SPEED An alarm (AL–02) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0003 SSPA: 03 DC–LINK FUSE IS BROKEN An alarm (AL–03) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0004 SSPA: 04 POWER SUPPLY ERROR An alarm (AL–04) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0005 SSPA: XX DECODED ALARM An alarm (AL–05) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0006 THERMAL SENSOR DISCONNECT An alarm (AL–06) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0007 SSPA: 07 OVER SPEED An alarm (AL–07) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0008 SSPA: XX DECODED ALARM An alarm (AL–08) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0009 SSPA: 09 OVERHEAT MAIN CIRCUIT An alarm (AL–09) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0010 SSPA: 10 LOW VOLT INPUT POWER An alarm (AL–10) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0011 SSPA: 11 OVERVOLT POWER CIRCUIT An alarm (AL–11) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0012 SSPA: 12 OVERCURRENT POWER CIRCUIT An alarm (AL–12) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0013 SSPA: 13 CPU DATA MEMORY FAULT An alarm (AL–13) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0014 SSPA: XX DECODED ALARM An alarm (AL–14) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0015 SSPA: 15 SPINDLE SWITCHING FAULT An alarm (AL–15) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0016 SSPA: 16 RAM ERROR An alarm (AL–16) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0017 SSPA: XX DECODED ALARM An alarm (AL–17) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0018 SSPA: 18 SUMCHECK ERROR PROGRAM
ROM
An alarm (AL–18) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0019 SSPA: 19 EXCESS OFFSET CURRENT U An alarm (AL–19) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0020 SSPA: 20 EXCESS OFFSET CURRENT V An alarm (AL–20) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
SP0021 POS SENSOR POLARITY ERROR An alarm (AL–21) occurred on the spindle amplifier unit
For details, refer to the Serial Spindle User’s Manual.
B.9
SPINDLE ALARM
(SP ALARM)