
B–63785EN/01
3. DATA INPUT/OUTPUT
255
NOTE
When method 1 (in which neither the output file name nor
number need be specified), described in “Output of
maintenance information,” is used to output maintenance
information to a FANUC Handy File and Memory card, the
file name will be MAINTINF.TXT.
(1)Enter MDI mode.
(2)Follow either of the procedures described below to display the system
configuration screen:
Method 1
Press the
SYSTEM
function key several times, until the system
configuration screen appears.
Method 2
(1)Press the
SYSTEM
function key.
(2)Click the [SYSTEMCONFIG] soft key.
Method 1 (neither the output file name nor number need be specified)
(1)Click the [PUNCH] soft key.
(2)Click the [SYSTEMCONFIG] soft key.
Method 2 (the output file name is specified)
(1)Click the [PUNCH] soft key.
(2)Click the [”FILE NAME] soft key.
(3)Key in the file name.
(4)Click the [FILE NAME”] soft key.
(5)Click the [SYSTEMCONFIG] soft key.
Method 3 (the file number is specified, one of three methods)
(1)Click the [PUNCH] soft key.
(2)Click the [(FILE#)] soft key.
(3)Key in the file number.
(4)Click the [SYSTEMCONFIG] soft key.
Method 4 (the file number is specified, one of three methods)
(1)Click the [PUNCH] soft key.
(2)Click the
N
address key.
(3)Key in the file number.
(4)Click the [SYSTEMCONFIG] soft key.
3.2.14
Output of System
Configuration Data
Setup for output
Executing output