
3. DATA INPUT/OUTPUT
B–63785EN/01
252
Method 3 (the file number is specified, one of three methods)
(1)Click the [PUNCH] soft key.
(2)Click the [(FILE#)] soft key.
(3)Key in the file number.
(4)Click the [PERIODMAINTE] soft key.
Method 4 (the file number is specified, one of three methods)
(1)Click the [PUNCH] soft key.
(2)Click the
N
address key.
(3)Key in the file number.
(4)Click the [PERIODMAINTE] soft key.
Method 5 (the file number is specified, one of three methods)
(1)Click the
N
address key.
(2)Key in the file number.
(3)Click the [PUNCH] soft key.
NOTE
When method 1 (in which neither the output file name nor
number need be specified), described in “Output of periodic
maintenance data,” is used to output periodic maintenance
data to a FANUC Handy File and Memory card, the file name
will be PMNTSYS.TXT.
(1)Enter EDIT mode.
(2)Follow either of the procedures described below to display the item
selection menu on the periodic maintenance screen:
Method 1
(1)Press the
SYSTEM
function key several times, until the periodic
maintenance screen appears.
(2)Click the [SET ITEM] soft key.
(3)Click the [SELECTITEM] soft key.
Method 2
(1)Press the
SYSTEM
function key.
(2)Click the [PERIODMAINTE] soft key.
(3)Click the [SET ITEM] soft key.
(4)Click the [SELECTITEM] soft key.
3.2.12
Output of Item
Selection Menu
(Machine System) Data
Setup for output