B-63983EN/02 8.LADDER DIAGRAM MONITOR AND EDITOR SCREENS ([PMC LADDER])
- 783 -
(2) Area of program list
(a) In the "SP area", the protect information for subprograms is
displayed, so are their program types.
(Lock): Unable to browse and edit (Global
program)
(Magnifying glass): Ladder program which is able to
browse but unable to edit
(Pencil): Ladder program which is able to
browse and edit
(b) Program name is displayed in the "PROG NO." field for
each program.
There are three kinds of program names.
COLLECT: means the collective monitor screen.
GLOBAL: means the whole program.
LEVELn (n = 1, 2, 3): means the Ladder level 1, 2 and 3.
Pm (m = subprogram number):
means subprogram.
By changing the “ADDRESS NOTATION” item in the
LADDER DIAGRAM MONITOR Setting screen to
“SYMBOL”, you can display symbols.
(c) The program size is displayed in the “SIZE” field for each
program.
If the program size is not over 1024 byte, the unit is shown
in byte.
If it is over 1024 byte, the unit is shown in kilo (1024) byte
with “K”.
Ex.) The case that program size is not over 1024 byte.
1023 bytes: “1023” is shown.
Ex.) The case that program size is over 1024 byte.
20000 bytes: “19K” is shown.
(Sizes are rounded off to whole
numbers before being displayed.)