B-63874EN-1/02 5.SUPPORTING TOOL MANAGEMENT
- 279 -
- GROUP NO.
This item lets you specify the group number (tool type number) for a
tool to be selected, using a number in the following range:
Data set range: 0 to 99999999
NOTE
This item is not displayed if the MSR parameter (bit
2 of parameter No. 14823) is '0'.
- Soft key descriptions
[TL-SEL]
This soft key lets you exchange the tool according to a specified
"TOOL NO." or "GROUP NO."
NOTE
An alarm is issued if "TOOL NO." and "GROUP
NO." are specified at the same time.
The functions of the other soft keys are the same as when tool
management is disabled.
Measurement screen
The function of this screen is the same as when tool management is
disabled.
Measurement result set screen (T-TOOL)
NOTE
With the CNC for a machining center, the "T-TOOL"
screen is not displayed.