5. OPERATION
5.2 Printout
A sequence program can be printed out.
When PC9801 is used, PRINT.SYS must be installed
beforehand. Install PRINT.SYS according to Section 2.1 .l.
For printout, FAPT LADDER allows the user to set the top margin, left margin, line spacing and
cross reference. For details on setting, see Section 1.4 of Part II.
l Compatible printers
This software is usable with the printers listed below.
NEC PC9801
I
IBM PC/AT
NEC PR201H
EPSON VP1000 (Note)
EPSON VP1000
(Note) To use an Epson VP1 000 with an NEC PC9801, a program modification is required. For
details, see Section 1.4 of Part II.
(1) General flow of operation for printout
-
Select a source program
Make # LS file
[ EXEC]
End -[ EXEC]
<Fl > <Fl>
v
Specify output item
Fig. 5.2 (a) Operation Flow and Screens
l-85