
B-66234EN/05 3.CREATING AND EDITING SEQUENCE PROGRAMS
- 115 -
CAUTION
1 Details are different between SUB3 (TMR) and
SUB5 (CTR).For details, see "Automatic input of
the TMR parameter of a functional instruction" and
"Automatic input of the CTR parameter of a
functional instruction", described later.
2 If you perform this operation with a parameter
number already input, an unused parameter
number subsequent to that number will be set.
3 If you perform this operation just after you enter the
parameter numbers, an unused parameter number
subsequent to input number will be set. If you click
"Auto" with the mouse, the same result as the item
2 is obtained.
4 If an attempt is made to perform this operation on a
function instruction to which this operation is not
applicable, the following error message will be
displayed.
'Cannot perform "Auto" on the instruction.'
If no unused number for parameters is found, the
following error message will be displayed.
'No unused parameter number.'
5 This function cannot be used when ladder edit in
the interface of two panes is selected; "Display
Window" and "Edit Window".