
B-66234EN/05 8.EXECUTING AND STOPPING SEQUENCE PROGRAMS
- 301 -
8 EXECUTING AND STOPPING
SEQUENCE PROGRAMS
This chapter describes how to execute and stop sequence programs.
WARNING
Special care is needed when you execute or stop a
program.
If a program is used inappropriately, the machine
may operate in an unexpected manner.
It is recommended that you not use this machine
while a person is near the machine.
How to check the execution or stop status
Check the execution or stop status on the status bar.
Fig. 8(a)
Preparation prior to accessing the PMC
Procedure
1 Connect a personal computer to the NC (PMC) with a cable.
(For the specification of the required cable, see Appendix
A.)
2 Check the communications status (connection or
disconnection) with the PMC.
Fig. 8(b)
3 In the disconnection status, select [Tool]-[Communication].
The [Communication] screen appears.
4 Click the <Connect> button to establish a connection.
Execution/stop status
Undisplay: When disconnected
: Execution status
: Stop status
Connection/disconnection status
: Disconnection status : Connection status