
3.CREATING AND EDITING SEQUENCE PROGRAMS B-66234EN/05
- 24 -
3.1.2 PMC Programming Method
The ladder method is one of the most extensively used methods for
programming PMC-based sequence control. Because this method was
originally based on control circuits in relay panels, it was initially easy
for sequence control engineers to understand. As the number of PMC
functions has increased, however, sequence programs have become
large and complicated. To cope with this situation, we have introduced
step sequence programming.
• What is the step sequence method?
The step sequence method is a sequence control programming
method that is based on a programmable controller. This method
is intended to represent a flow of control directly using a
flowchart. With this method, an individual control module is
described using the conventional ladder method. Therefore, the
step sequence method allows the user to visually describe the
entire process flow. So, it is suitable for total process control.
See "Introduction--Features of FANUC LADDER-III and its
Functions Classified by PMC Model," for details on the models
that can use step sequences.
• Sequence configuration
Ladder programs can take any one of the following five
configurations.
- Ladder level 1
- Ladder level 2
- Ladder level 3
- Ladder subprogram
- Step sequence subprogram
NOTE
Ladder level 3 is omissible.
LEVEL1
LADDER
LEVEL2
LADDER
LEVEL3
LADDER
Sub Pro
ram P1
Ste
Se
uence
Sub Pro
ram P2
LADDER
Sub Pro
ram P3
LADDER
Sub Pro
ram Pn
Ste
Se
uence
: