
FANUC LADDER-III
SUPPLEMENTARY OPERATOR’S MANUAL
01 05/05/30 First issue B-66234EN/05-3
EDIT
DATE
DESIG.
DESCRIPTION
21/55
TITLE
DRAW.NO.
SHEET
CUST.
4. Multiple address replace function
The address of the symbol and the ladder program is replaced at a time. There is the following as
the replace condition. There are the following replace conditions.
- Multiple address specification
- Address range specification
- Specification of local symbol and ladder program
3.5.24 Multiple address replace function
After the multiple setting of the replacing address and the address range are
set, the address of the symbol and the address of the ladder program is
replaced at a time.
(Example)
The following replace can be done.
- Replace bit/byte address of R9000 to R9499 with Z0 to Z499.
- Replace R0.2 to R0.7 with R1.0 to R1.5.
- The multiple setting such as to replace R1.1 with R1.6 and to replace
R1.2 with R1.5.
- Replace bit/byte address of X0 to X31 with X20 to X51.
("Before replace address" and "After replace address" overlap.)
Supported PMC models
Supported
All
Add to after "3.5.23 Replace".