
2.STANDARD OPERATION B-63924EN/01
- 194 -
2.5.11.9 Setting data tables of PMC data
Each PMC data item can be set on the data table screen.
Procedure
1 If the [PMC Data] screen does not display a data table, display a
desired data table on the [PMC Data] screen as described in
Subsection 2.5.11.6, "Displaying a data table of PMC data".
2 On the screen of the BYTE type, WORD type, or DWORD type,
enter a desired value in the field to be set through the keyboard
or MDI panel.
Press the [Enter] key on the keyboard or the [INPUT] key on the
MDI panel to set the input value with the CNC.
3 On the screen of the BIT type, a value can be changed by
pressing the operation key
or , or by pressing
the space key on the keyboard.
Alternatively, a value can be entered in a desired field placed at
the right end.
In this case, press the operation key
, the [Enter] key on
the keyboard, or the [INPUT] key on the MDI panel to set the
input value with the CNC.
Press the operation key
, the [Esc] key on the keyboard,
or the [CAN] key on the MDI panel to cancel the input.