
A.SCREEN-SPECIFIC CNC SETTINGS APPENDIX B-63924EN/01
- 334 -
15. [Work Shift] screen
CNC supported FS30i/31i/32i
Optional function None (basic)
Whether the [Work Shift] screen (lathe system) is to be displayed
Bit 6 of parameter No. 1201 = 0 Displayed
= 1 Not displayed
Axis name
See the [Overall Position] screen.
Modification to the order of axis names
Parameter No. 3134
Inch/metric switching
When the "inch/metric switching" option is specified
Bit 2 of parameter No. 0000 = 0 Metric
= 1 Inch
Operation error protection function "incremental input recheck"
Bit 0 of parameter No. 10330 = 0 Displayed
= 1 Not displayed
Operation error protection function "display of a valid data range"
When the following parameters are set:
Parameter No. 10328 Lower limit of a workpiece coordinate system
shift value
Parameter No. 10329 Upper limit of a workpiece coordinate system
shift value
Modification to workpiece coordinate system shift data
When the 8-level data protection function is disabled, or
When the 8-level data
rotection function is enabled and the o
eration
level is not lower than the change protect level
The units of shift values are as follows:
1013#3
(ISE)
1013#2
(ISD)
1013#1
(ISC)
1013#0
(ISA)
Linear axis
Metric input
[mm]
Linear axis
Inch input
[inch]
Rotation
axis
[deg]
(IS-A) 0 0 0 1 0.01 0.001 0.01
(IS-B) 0 0 0 0 0.001 0.0001 0.001
(IS-C) 0 0 1 0 0.0001 0.00001 0.0001
(IS-D) 0 1 0 0 0.00001 0.000001 0.00001
(IS-E) 1 0 0 0 0.000001 0.0000001 0.000001
Settin
s re
uired
for screen dis
la
modification and
operation
16. [Parameter] screen
CNC supported FS30i/31i/32i
Optional function None (basic)
Settin
s re
uired
for screen dis
la
modification and
operation
Modification to parameter data
When the 8-level data protection function is disabled, or
When the 8-level data
rotection function is enabled and the o
eration
level is not lower than the change protect level
17. [Diagnosis] screen
CNC supported FS30i/31i/32i
Optional function None (basic)
Settin
s re
uired
for screen dis
la
modification and
operation
None