
B-63924EN/01 2.STANDARD OPERATION
- 77 -
2.3.4.1 Writing an NC program back to the CNC
The NC program being edited on the edit screen of Basic Operation
Package 2 can be written back to the CNC.
Procedure
1 If the [Program Edit] screen is currently not displayed, display
the [Program Edit] screen as described in Subsection 2.3.4,
"Editing an NC Program".
2 Press the display/operation switching key
to display the
operation keys.
3 Press the operation key
to display the [Program Edit -
Write Back to NC] screen.
4 Specify a name for the NC program to be written back to the
CNC.
When the NC program to be written back is to be executed next,
check the [Save as main.] check box.
Click the <OK> button.