
B-63324EN-1/03 OPERATION 12.INPUTTING/OUTPUTTING DATA
- 567 -
12.9 INPUTTING AND OUTPUTTING TOOL OFFSET DATA BY
TOOL NUMBER
12.9.1 Outputting Tool Offset Data by Tool Number
The following explains the operation for outputting the Tool offset data
by tool number registered in the memory of the CNC to a floppy disk.
Setup for output
(1) Select MDI mode.
(2) Follow either of the procedures described below to display the
Tool offset data by tool number screen.
Method 1
Press the
OFFSET
SETTING
function key several times, until the Tool
offset data by tool number screen appears.
Method 2
(1) Press the
OFFSET
SETTING
function key.
(2) Press the [
T CODE OFFSET
] soft key.
Execution of output
Method 1 (Neither the output file name nor number need be specified)
(1) Press the [PUNCH] soft key.
(2) Press the [T CODE OFFSET] soft key.
Method 2 (The output file is specified with its file name)
(1) Press the [PUNCH] soft key.
(2) Press the ["FILE NAME] soft key.
(3) Enter a file name.
(4) Press the [FILE NAME"] soft key.
(5) Press the [T CODE OFFSET] soft key.
Method 3 (Specified with its file number (one of three methods))
(1) Press the [PUNCH] soft key.
(2) Press the [(FILE#)] soft key.
(3) Enter a file number.
(4) Press the [T CODE OFFSET] soft key.