
B–61863E/15
4. OPERATIONPMC PROGRAMMER (SYSTEM P series)
1123
The ladder program can be stored in or fetched out of a floppy cassette/FA
card by connecting P–G and floppy cassette adapter/FA card adapter by
using this function enables reading the program stored in a floppy
cassette/FA card by using PMC RAM into P–G or reading the program
stored in a floppy cassette/FA card by using P–G into PMC RAM. The
usable adapters are as follows:
D FANUC floppy cassette adapter (A13B–0150–B001)/floppy cassette
(A87L–0001–0039)
D FA card adapter (A13B–0148–B001)/FA card (A87B–0001–0108)
When using the FANUC floppy cassette adapter/FA card adapter, change
the settings of the input/output devices by the following ‘IO commands’.
1 Press the R3 key on the R key menu screen. ‘REQUEST=’ is
displayed lower left on the screen, and keying in is permitted.
2 Key in ‘IO BCA, CN2, F13, F14 [NL]’. The floppy cassette
adapter/FA card adapter is assigned to channel 2.
3 To return the assignment to channel 2 to PMC WRITER, key in ‘IO
AUX, CN2, F9 [NL]’.
1 Turn on F13 key.
(Turn on F12 too, when C language program is included.)
2 Key in the menu No. ‘3 [NL]’.
3 (For PMC–SC only) Enter the type of a ROM module to be used.
(See the following note for selecting ROM module B or C.)
SELECT THE TYPE OF ROM MODULE ACCORDING TO THE
FOLLOWING NO.
ROM MODULE 0:A, 1:B, 2:C
No. =
4 The message is displayed lower left on the screen.
SET BC & KEY IN ‘OK’ OR ‘NO’
BC = OK <FILE NO. OR NEXT>
BC =
5 Set the floppy cassette/FA card in the adapter, and enter the following
data.
6 ‘OK 1 [NL]’ (specify file No.) or ‘OK NEXT [NL]’ (read the next
file).
4.10
INPUT/OUTPUT OF
LADDER PROGRAM
WITH P–G AND
FLOPPY
CASSETTE/FA CARD
4.10.1
General
4.10.2
Setting I/O Commands
4.10.3
Program Input