
f : Can be used
: Cannot be used
B–61863E/15
5. FUNCTIONAL INSTRUCTIONS
PMC SEQUENCE PROGRAM
341
PA1 PA3 SA1 SA2 SA3 SA5 SB SB2 SB3 SB4 SB5 SB6 SB7 SC SC3 SC4 NB NB2 NB6
f f f f f f f f f f f f f
The CALL functional instruction calls a subprogram. When a
subprogram number is specified in CALL, a jump occurs to the
subprogram if a condition is satisfied.
CALL
SUB 65
Subprogram
number
ACT
(a) Input signal
ACT=0 : The CALL instruction is not executed.
ACT=1 : The CALL instruction is executed.
(a) Subprogram number
Specifies the subprogram number of a subprogram to be called. The
subprogram number must be specified in the P address form.
Example : To call subprogram 1
CALL
SUB 65
P1
ACT
CAUTION
Be careful when using the CALL instruction with the COM,
COME, JMP, or JMPE functional instruction. For details,
see Chapter 9 in Part I.
5.65
CALL (CONDITIONAL
SUBPROGRAM
CALL)
5.65.1
Function
5.65.2
Format
5.65.3
Control Conditions
5.65.4
Parameters