
5. FUNCTIONAL INSTRUCTIONS
B–61863E/15
PMC SEQUENCE PROGRAM
218
ACT=1 : The logical instructions (including functional instructions) in
the specified range are skipped; program execution proceeds to
the next step.
ACT=0 : The same operation as when JMP is not used is performed.
(a) Specify 0. (Range specification only)
NOTE
JMP instruction operation
When ACT = 1, processing jumps to a jump end instruction
(JMPE); the logical instructions (including functional
instructions) in the specified jump range are not executed.
When the Ladder program is executed in the nonseparate
mode, this instruction can reduce the Ladder execution
period (scan time).
Do not create a program in which a combination of JMP and JMPE
instructions is used to cause a jump to and from a sequence between the
COM and COME instructions; the ladder sequence may not be able to
operate normally after the jump.
JMP instruction
JMP instruction
COM instruction
COM instruction
JMPE instruction
JMPE instruction
COME instruction
COME instruction
Prohib-
ited
Prohib-
ited
5.20.7.3
Control Conditions
5.20.7.4
Parameters
5.20.8
Caution