
B–61863E/15
B. WINDOW FUNCTION DESCRIPTION
(PMC–PA1/PA3/SA1/SA2/SA3/SA5/SB/
SB2/SB3/SB4/SB5/SB6/SB7/SC/SC3/SC4)
APPENDIX
1317
[Description]
The preset data is set to the relative coordinate controlled by CNC. If 0
is set as preset data it becomes to origin.
But it is impossible to write the value of preset data to the transferring
axis. In the case of the preset of relative coordinate of all axes is executed
by using this function, if only one axis is transferring, the preset of relative
coordinate cannot be executed, neither.
[Input data structure]
Case of writing data on each axis.
Top address +0
+2
+4
+6
+8
+10
(Function code)
249
(Completion code)
–
(Need not be set.)
(Data length)
4
(Data number)
0
(Data attribute)
M
(M: Axis number)
Signed binary
(A negative value is represented in 2’s
complement)
Value
+12
Value of relative coordinate for the
controlled axis specified (4bytes)
M=1 to n: Write data on each
(n is the axis number)
Input data unit
Input system
Increment
system IS–B
Increment
system IS–C
Machining center
mm, deg
system
0.001 0.0001
system
inch system 0.0001 0.00001
Radius
specification
mm, deg
0.001 0.0001
Lathe
Diameter
specification
system
0.001 0.0001
system
Radius
specification
0.0001 0.00001
Diameter
specification
inch system
0.0001 0.00001
B.4.76
Preset of relative
coordinate
(:Low–speed
response)
(not available for
Power Mate and Series
21–TA)