
B–61863E/15
J. APPLICABLE FANUC LADDER EDITIONSAPPENDIX
1519
NOTE
The edition of FANUC LADDER adopted for the PMC–SA2
or PMC–SB2 can be used to program the PMC–SA3 or
PMC–SB3 as long as some functional instructions including
structured programming are not used (as long as FANUC
LADDER is used within the range of the specifications of the
PMC–SA2 or PMC–SB2).
When this edition is used:
(1)The following functional instructions cannot be used.
(For details, see Section 5 of Part I.)
– MOVB, MOVW, MOVN
– DIFU, DIFD
– AND, OR, NOT, EOR
– END, CALL, CALLU, SP, SPE
– JMPB, JMPC, LBL
(2)A sequence program created by the editing function
(ladder editing module) contained in the PMC–SA3/SB3
cannot be edited after it is read into the offline programmer.
(3)A sequence program created by the offline programmer
and transferred to the PMC (sequence program
transferred and edited by the built–in editing function)
can be edited again after it is read into the offline
programmer.