
B–61863E/15
8. WRITING, READING, AND COMPARING
SEQUENCE PROGRAMS AND
PMC PARAMETERS
PMC–NB6 MANIPULATION
781
In STATUS area in the lower part of the screen, a detailed explanation of
execution and the execution status are displayed. During write, read, and
comparison, the size of the data already transferred is indicated as the
status of the execution. The following gives a display example shown
when PMC parameters are written to a memory card:
NOTE
1 The [I/O] soft key is displayed by setting bit 1 of keep relay
K900 to 1.
2 For an explanation of error messages on I/O screen, see
section 8.9, ”I/O screen Error Messages”.
3 The message ”C LANGUAGE” is not displayed when the C
language board is not installed.