
6. LADDER DIAGRAM MONITOR
AND EDITOR
B–61863E/15
PMC–NB6 MANIPULATION
740
(a) Screen structure
1. It is basically same with LADDER Diagram Editor screen, except
that only one net is in this screen, and that position bar at right
edge of screen does not appear at this screen.
2. Current edit mode is indicated at right of the top line as ”NEW
MODE” or ”MODFY MODE”. When [ZOOM] soft key at
LADDER Editor screen is used to reach Net Editor screen, the
screen is in Modify mode, and when [NEW NET] soft key is used,
it is in New mode.
3. Current net number is displayed at right of the top line. The net
number is same with the net number in previous LADDER
Diagram Editor screen.
4. Net Editor screen expands image of net horizontally for a wider
net according to its width, while LADDER Diagram
Monitor/Editor screen folds nets wider than screen width. When
net width is expanded over screen width, attempt to move cursor
out of screen will scroll net image to the direction.
The net of maximum size occupies area of 1024 elements, but
actually available area may be little less for internal use according
to the internal condition: ”element” means the space that is
occupied by single relay.
6.3.1
Screen Structures