
7. WRITING, READING, AND VERIFYING
THE SEQUENCE PROGRAM AND
PMC PARAMETER DATA
B–61863E/15
PMC PROGRAMMER (CRT/MDI)
574
CAUTION
1 Operation in PMC–NB/NB2
(a)If data is stored in FLASH ROM, a message is displayed
to confirm writing.
(b)RAM SIZE indicates the size of the sequence program.
MAX SIZE indicates the size of the ROM option in the
PMC.
A: 64K bytes, B: 128K bytes, C: 256K bytes,
D: 512K bytes, E: 1M bytes
2 When a C board is installed in the Series 16i/18i, ladder
programs and C programs must be written into FLASH ROM
separately.
(a)When a ladder program is written into FLASH ROM,
select [LADDER] from the DATA KIND item.
When a C program is written into FLASH ROM, select
[C–LANG] from the DATA KIND item.
(b)Select [WRITE] from the FUNCTION item.
(c)Press the [EXEC] soft key to start writing to FLASH ROM.
(b) Reading data from FLASH ROM
Item Operation
DEVICE Press the [F–ROM] soft key.
FUNCTION Press the [READ] soft key.
Press the [EXEC] soft key to start inputting data.
(c) Comparing data in FLASH ROM
Item Operation
DEVICE Press the [F–ROM] soft key.
FUNCTION Press the [COMPAR] soft key.
Press the [EXEC] soft key to start comparing data.
(d) Checking if data is stored in FLASH ROM
Item Operation
DEVICE Press the [F–ROM] soft key.
FUNCTION Press the [BLANK] soft key.
Press the [EXEC] soft key to check if data is stored in FLASH ROM.
CAUTION
Operation in PMC–NB
When data is stored in FLASH ROM : BLANK ERROR is
displayed.
When no data is stored in FLASH ROM : BLANK
COMPLETE is displayed.