
B–61863E/15
4. PMC DATA SETTING AND
DISPLAY (PMCPRM)
PMC–NB6 MANIPULATION
689
There are two data table types (data table control data table and data table).
(1)Data table control data screen (C.DATA)
Clicking the [DATA] soft key displays the data table control data
setting screen for data table management.
Table contents
D GROUP TABLE COUNT:Number of data items in the data table
D NO.: Group number
D ADDRESS: Data table start address (the same address can be
specified for different groups.)
D PARAMETER: Table parameter(NOTE)
D TYPE: Data length (0 = 1 byte, 1 = 2 bytes, 2 = 4 bytes)
D DATA: Number of data items in each data table
Soft key definitions
[G.DATA]: Clicking this soft key switches to the screen for setting
and displaying the data in the data table.
[G.CONT]: After the number of groups is entered, clicking this soft
key asserts the number of groups for the data table.
[NO.SRH]: After a group number is entered, clicking this soft key
moves the cursor to the specified group.
[INIT]: Clicking this soft key initializes the data table.
* The initial data is as follows:
NO. ADDRESS PARAMETER TYPE DATA
001 D0000 00000000 0 8000
4.7
DATA TABLE (DATA)