
5. EDITING OF SEQUENCE
PROGRAM (EDIT)
B–61863E/15
PMC PROGRAMMER (CRT/MDI)
542
(6) Soft key [F–SRCH]
Type in the functional instruction number and press the [F–SRCH]
key to start searching the functional instruction. When the [F–SRCH]
key is pressed during execution of a functional instruction, the
functional instruction with the same number as this instruction is
searched.
(7) Searching with cursor keys (<²>, <³>, <°>, <±>)
D Type in the address or symbol and press the cursor key to start
searching the address. When the ”³” key is pressed, the operation
is performed in the same manner when the [SRCH] key is pressed.
D Type in NET NO. and press the cursor key to start searching the NET
NO.
D Type in the functional instruction name or functional instruction
number with “S” and press the cursor key to start searching the
functional instruction.
Example) Type in “END1” or “S1” and press the cursor key to
search functional instruction END1.
The sequence program with multiple NETs can be copied in NETs.
Specify the NET to be copied and the copy position with the cursor. The
number of copies can be also specified.
FUNCTN
COPY MOVE
UNTIL
CANCEL
SEARCH
RETURN
C–UPC–DOWN
TO CANCEL SEARCH C–UPC–DOWN
yj jy yj jy Ę j yĘyj
1 Copying
Move the cursor to the NET to be copied and press the [COPY] key.
The NET to be copied blinks on the screen.
2 Copying multiple NETs
Move the cursor with the cursor UP/DOWN key, [C–UP] key,
[C–DOWN] key, or [SEARCH] key to blink the NETs to be copied.
Type in a value and press [C–UP] or [C–DOWN] key to scroll up or
down the screen by the number of times specified by this value.
3 Setting the NET to be copied
Press the [UNTIL] key.
4 Specifying the copying address
Press the [TO] key to start copying a NET. The NET is copied into
the position above the cursor. If the number of copies is typed in
before the [TO] key is pressed, the NET is copied the specified
number of times.
5.2.6
Copying the Sequence
Program