
3. LADDER DIAGRAM
MONITOR (PMC–SB7)
B–61863E/15
FS16i/18i/21i/0i–B PMC–SA1/SB7 MANIPULATION
872
NOTE
1 Forced I/O function is enabled when ”RAM WRITE ENABLE”
setting is set to ”YES” in GENERAL screen of PMC Settings.
If the setting is ”NO”, INPUT key will be just ignored.
2 Parameters of timer functional instructions, TMR, TMRB,
and TMRC, which have special monitor formats, are not
supported by Forced I/O function.
(c) Notes for Search function
1 The string followed by [SEARCH] is treated as symbol first. In
case that the symbol ”D0” is assigned to the bit address ”R0.0”, the
operation ”D0” + [SEARCH] will search the bit address ”R0.0”,
instead of byte address ”D0”.
3
2 To search the symbol that consists of only digit characters, which
will usually be treated as net number, you can use leading space to
specify explicitly the string is symbol. For example, while ”123”
+ [SEARCH] will search the 123rd net from top of the LADDER,
”_123” + [SEARCH] (”_” is space) will search address with
symbol ”123”.
3 When the range for searching is GLOBAL, and the target is found
in other than displaying subprogram, the screen will automatically
switch to the subprogram to which the found target belongs.
Searching GLOBAL net number that current subprogram does not
contain, for example, the subprogram that contains the net of the
net number will appear in the screen, displaying the net.
(d)Shortcuts
1 Right/left cursor move keys that are following some string means
searching forward/backward. You can use following strings for
this search operation:
D Digits for net number
D ”1” for top, ”0” for bottom
D ”S” + digits, for Functional instructions
D Other string for symbol or bit/byte address
D Leading space always makes the string treated as a symbol or
address.
Example: ”_123”+[SEARCH] (”_” means space) will search
the symbol ”123” instead of the 123rd net.
2 When cursor is hidden, left/right cursor move keys without string
act just like [PREV]/[NEXT] soft keys.
3 String followed by [SEARCH] soft key in ”PMCLAD Main soft
keys” starts searching directly. In this case, [SEARCH] soft key
acts just like right cursor move key.
4 [SEARCH] soft key in ”Search soft keys” without string searches
the address or the functional instruction under cursor forward. If
cursor is hidden, or cursor is placed neither on a relay nor on a
functional instruction, this operation just repeats the last successful
search forward, just like [NEXT] soft key.