
B–61863E/15
5. PMC LADDER DIAGRAM DISPLAY
(PMCLAD)
PMC OPERATION (CRT/MDI)
501
This function is used for dividing display of ladder diagram.
The maximum number of division is 6.
LADDER *TITLE DATA REMARKS 32 BYTES * NET 00001-00004 MONIT RUN
*NET NO. 00001 – 00001
X1000.1 X1000.1 X1000.1 X1000.1 X1000.1 X1000.2 Y1000.0
*ESP SMBL X100.0 X100.0 X100.0
*NET NO. 00001 – 00001
X1000.0 X1000.1 X1000.2 Y1000.1
X1000.0 X1000.1 X1000.2 Y1000.2
ESP SMBL
ADDRESS DUMP
G0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .............
G0016 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .............
G0032 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .............
G0048 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .............
G0064 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .............
[DIVIDE ] [ CANCEL ] [ DELETE ] [SELECFT ] [ WIDTH ]
Fig. 5.7 Dividing display of ladder diagram
NOTE
For DUMP display, dump screen is displayed at the last part
of screen.
For this operation, press [WINDOW] soft key to bring the following
menu.
SEARCH ADRESS TRIGER WINDOW
DIVIDE CANCEL DELETE SELECT
RET
WIDTH
The function of the soft key is as follows :
(1) [DIVIDE] : The screen will be divided.
The dividing display of ladder diagram can be
displayed for the designated NET number.
(NET number + [DIVIDE] )
(2) [CANCEL] : The dividing display of ladder diagram display ends.
(The screen returns to normal display.)
(3) [DELETE] : The screen division subject to operation is ended.
(4) [SELECT] : Change the screen subject to division operation.
The screen in operation is displayed by “purple” title
line, another screen is displayed by “blue” title line.
In monochrome CRT, the screen is displayed by
changing brightness.
5.7
DIVIDING DISPLAY
OF LADDER
DIAGRAM