
B–63610EN/01
4. DESCRIPTION OF PARAMETERS
341
#7
8304
#6 #5 #4 #3 #2 #1 #0
USD
[Data type] Bit axis
USD In simple synchronous control, the uni–directional synchronization
function uses:
0 : Axis of which machine coordinate is larger as the reference.
1 : Axis of which machine coordinate is smaller as the reference.
NOTE
Set this parameter (USD) to the same value for both the
master and slave axes.
#7
8305
#6 #5 #4 #3 #2 #1
USE
#0
USC
[Data type] Bit
USC In simple synchronous control, the uni–directional synchronization
function is:
0 : Not used.
1 : Used.
NOTE
This parameter is valid only when bit 7 (SOF) of parameter
No. 8301 or bit 7 (SOFx) of parameter No. 8303 is set to 1.
USE In simple synchronous control, after emergency stop, the uni–directional
synchronization function is:
0 : Used.
1 : Not used.
NOTE
This parameter is valid only when bit 7 (SOF) of parameter
No. 8301 or bit 7 (SOFx) of parameter No. 8303 is set to 1.