
4. DESCRIPTION OF PARAMETERS
B–63610EN/01
354
NOTE
The available size depends on the amount of installed
DRAM and the selected options.
8790 Timing for executing an auxiliary macro
[Data type] Word
This parameter sets the timing for executing a macro executor auxiliary
macro while NC programs, offset data, and so forth are being read or
punched out.
When as many characters as the number specified with this parameter are
read or punched out, an auxiliary macro is executed once. When 0 is set in
this parameter, no auxiliary macro is executed during read or punch
processing.
#7
8801
#6 #5 #4 #3 #2 #1 #0
[Data type] Bit
Bit parameter 1 for machine tool builder
#7
8802
#6 #5 #4 #3 #2 #1 #0
[Data type] Bit
Bit parameter 2 for machine tool builder
NOTE
These parameters are used only by the machine tool builder.
Refer to the relevant manual supplied by the machine tool
builder for details.
8811 2–word parameter 1 for machine tool builder
8812 2–word parameter 2 for machine tool builder
8813 2–word parameter 3 for machine tool builder
[Data type] 2–word
[Valid data range]
–99999999 to 99999999
NOTE
These parameters are used only by the machine tool builder.
Refer to the relevant manual supplied by the machine tool
builder for details.