
11. OPTION RELATED TO SPINDLE
B–65162E/03
510
Spindle switching control uses a spindle amplifier module TYPE III in a
machine that has two spindle motors but does not move both
simultaneously. Furthermore, it has an electromagnetic contactor to
change power lines on the outside of the spindle amplifier. The function
works by switching between motors with the same characteristics or two
motors that have different output power characteristics.
It has the following uses.
D In turning centers etc. it uses a single spindle amplifier to switch the
power line, velocity feedback signal line and the orientation signal line
using the Main Spindle Motor for turning and the Sub Spindle Motor
for rotation tools.
D It uses a single spindle unit to switch the power line, velocity feedback
signal line and the orientation signal line using the vertical axis motor
and horizontal axis motor of the machine tool with five- surface
machining capability.
NOTE
This function is not available for αC series.
To control two spindle motors with one spindle amplifier, the following
are additionally required:
D Magnetic contactor (switch unit) for power line switching
D Signals between the PMC and switch unit
Switch signal
Status check signal
Switch unit
Spindle
amplifier
module
(SPM)
Type 3
Power
line
Main
spindle
motor
PMC
CNC
Feedback signal
Sub
spindle
motor
Feedback signal
11.6
SPINDLE SWITCHING
CONTROL
11.6.1
General
11.6.2
Configuration