
3. HOW TO SELECT THE POWER SUPPLY MODULE
B–65162E/03
66
Multiple servo amplifier modules and spindle amplifier modules can be
connected to a single power supply module (PSM–HV) provided the
capacity of the power supply module is not exceeded.
For the number of units that can be connected, see the following table:
Table.3.6.3 Maximum Number of Modules That Can be
Connected
SVM–HV
–
SVM1–HV SVM2–HV
6
4
NOTE
When the two types of servo amplifier module are used
together, the result of the following expression must not
exceed 6:
Total number of connected modules (6) Number of SVM1s
x 1 + number of SVM2s x 1.5
Even when no spindle amplifier module is used, the number
of servo amplifier modules that can be connected remains
unchanged.
(1) When two α12/3000HV servo motors and one α22HV spindle motor
are used
Servo motor α12/3000HV
Continuous rated output : 2.8 kW
Maximum output at acceleration : 6.3 kW
Spindle motor
α22HV
Continuous rated output : 22 kW
Maximum output at acceleration : 31.2 kW
Rated output capacity of power supply module y Σ spindle motor
continuous rated output 1.15 + Σ servo motor continuous rated
output 0.6
= 22 1.15 + 2.8 2 0.6
= 28.66 Condition 1
Maximum output capacity of power supply module y Σ maximum
output of the spindle motor at acceleration + Σ maximum output of
the servo motors at acceleration (simultaneous acceleration
/deceleration)
= 31.2 + 6.3 2
= 43.8 Condition 2
According to conditions 1 and 2, PSM–30HV is selected as the power
supply module.
3.6.3
Number of Connected
Servo Amplifier
Modules and Spindle
Amplifier Modules
3.6.4
Example of Selecting a
Power Supply Module
(PSM–HV)