
B–65162E/03
11. OPTION RELATED TO SPINDLE
517
(1) When the Status of both Electromagnetic Contactors for the Sub Spindle (MCFNA) and for the Main Spindle
(MFNHGA) is Confirmed on the Spindle Side and the Spindle Switching Control Works
Parameter NO.4014 #2=1 (FS16)
t
2
t
1
CLOSED (=1)
MAIN (=0)
ON (=1)
MAIN SPINDLE ³ SUB SPINDLE ³ MAIN SPINDLE
Spindle forward rotation command
(SFRA) or Spindle reverse rotation
command (SRVA)
PMC ³ CNC
Spindle motor speed
Speed zero signal (SSTA)
CNC ³ PMC
Switching request signal (SPSLA)
PMC ³ CNC
Power-line switching signal (CHPA)
CNC ³ PMC
Main side electromagnetic contactor
(MCC2)
Main side electromagnetic contactor
status signal (MFNHGA)
PMC ³ CNC
Sub side electromagnetic contactor
(MCC1)
Sub side electromagnetic contactor
status signal (MCFNA)
PMC ³ CNC
Switching completion signal (CFINA)
CNC ³ PMC
ON (=1)
ON (=1)
ON (=1)
OFF (=0) OFF (=0)
Stop
OFF (=0) OFF (=0) OFF (=0)
ON (=1)
MAIN (=0) MAIN (=0)
MAIN (=0)
MAIN (=0)
SUB (=1)
MAIN
(=0)
OPEN (=0)
SUB (=1)
CLOSED (=1)
CLOSED
OPEN
CLOSED
OPEN (=0)
CLOSED (=1)
OPEN
OPEN (=0)
CLOSED
SUB (=1)
OPEN
t
2
’
t
1
’
t
1
<1sec
besides
t
2
<1sec
t
1
’<1sec
besides
t
2
’<1sec
NOTE
If the electromagnetic contactor status check signals for the main spindle (MFNHGA) and for
the sub spindle (MCFNA) do not change within 1 second after the switching request signal
(SPSLA) is changed, the alarm occurs.
11.6.7
Sequence