
B–64113EN–1/01
13. INPUT/OUTPUT OF DATA
899
#7
MDN0138
#6 #5 #4 #3 #2 #1 #0
[Data type] Bit
MDN The DNC operation function by a memory card is:
0: Disabled.
1: Enabled. (A PCMCIA card attachment is required.)
NOTE
Use a PCMCIA card attachment suited to the CNC to secure
the memory card in the CNC.
#7
0300
#6 #5 #4 #3 #2 #1 #0
PCM
[Data type] Bit
PCM If the CNC screen display function is enabled, when a memory card
interface is provided on the NC side (HSSB connection),
0: The memory card interface on the NC side is used.
1: The memory card interface on the PC side is used.
This parameter is valid when parameter No. 20 is set to 4 (memory card
interface). This parameter is valid only while the CNC screen display
function is active.
#7
0138
#6
OWN
#5 #4 #3 #2 #1 #0
[Data type] Bit
OWN When NC data or an NC program is output to a memory card, a message
for file overwrite confirmation is:
0: Displayed.
1: Not displayed.
NOTE
For file overwrite operation using the screen hardcopy
function, maintenance information screen, and PMC
screen, the confirmation message is not displayed.
(5) Parameters of
Memory Card
Interface